lehuy0305's Blog

Thông tin cá nhân

lehuy0305
Họ tên: Lê Thanh Huy
Nghề nghiệp: Developer PHP
Sinh nhật: 3 Tháng 5
Nơi ở: Hà Nội
Trạng thái: User is offline (Vắng mặt)
Thêm vào nhóm bạn bè
Gửi tin nhắn
Chào tất cả các bạn!************ ^_^ *********** !Dù Thế Nào Đi Nữa*******Anh vẫn mãi yêu em,Ngốc ạ!*************

Xem theo danh mục
Xem theo danh mục:
     


Tìm kiếm:
     

Thực đơn người xem
Thêm lehuy0305 vào sổ địa chỉ
Gửi tin nhắn cho lehuy0305
Gửi email cho lehuy0305
Xem thông tin về lehuy0305
Kho lưu trữ


Bài viết cuối
Thiết kế website bất động sản
Thiết kế website du lịch
Công ty thiết kế web chuẩn SEO
Thiết kế website giá rẻ
Thiết kế website chuyên nghiệp
Phan So
Menu chương trình
In ra cac so nguyen to tu 1000 den 2000
CountChar.java
TestCar.java

CHBTNSB
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30

Tik Tik Tak ! ^_^..........?

Bình luận mới
nguyen phuc trong Phan So
Guest_phuc_* trong Phan So
nguyen phu trong Phan So
lehuy0305 trong Chuyện Net!
lehuy0305 trong Chuyện Net!
lehuy0305 trong Đọc đi!
lehuy0305 trong Anh khờ.
lehuy0305 trong Anh khờ.
lehuy0305 trong Những câu nói bất hủ!!!!
lehuy0305 trong Những câu nói bất hủ!!!!

Module11_S2

   Trong: CCNA
 
Nov 14 2007, 09:37 PM     Bởi: lehuy0305
1.


Create a standard ACL that will deny traffic from 192.5.5.25 to the 210.93.105.0 network but will allow traffic from all other hosts. (Choose two.)
Router(config)# access-list 22 deny 192.5.5.25 0.0.0.0
Router(config)# access-list 22 deny host 192.5.5.25 0.0.0.0
Router(config)# access-list 22 permit any any
Router(config)# access-list 22 deny 192.5.5.25 0.0.0.0
Router(config)# access-list 22 permit any
Router(config)# access-list 22 deny host 192.5.5.25
Router(config)# access-list 22 permit any
Router(config)# access-list 22 deny 192.5.5.0 0.0.0.255
Router(config)# access-list 22 permit any
2.
Where should a standard access control list be placed?
close to the source
close to the destination
on an Ethernet port
on a serial port
3.
Which statement is true regarding wildcard masks?
The wildcard mask and subnet mask perform the same function.
The wildcard mask is always the inverse of the subnet mask.
A "0" in the wildcard mask identifies IP address bits that must be checked.
A "1" in the wildcard mask identifies a network or subnet bit.
4.
The following commands were entered on a router:

Router(config)# access-list 2 deny 172.16.5.24
Router(config)# access-list 2 permit any

What can be concluded about this set of commands?
The access list statements are misconfigured.
All nodes on 172.16.0.0 will be denied access when these statements are applied.
The default wildcard mask, 0.0.0.0 is assumed.
The default wildcard mask 255.255.255.255 is assumed.
5.
ACL statements operate in sequential, logical order. If a condition match is true, the rest of the ACL statements are not checked. If all of the ACL statements are unmatched, what happens to the packet?
The packets will be placed in a buffer and forwarded when the ACL is removed.
The packets will be sent to the source with an error notification message.
The implicit permit any statement placed at the end of the list will allow the packets to flow through uninhibited.
The implicit deny any statement placed at the end of the list will cause the packets to be dropped.
6.
Select the statements that describe ACL processing of packets. (Choose three.)
An implicit deny any rejects any packet that does not match any ACL statement.
A packet can either be rejected or forwarded as directed by the statement that is matched.
A packet that has been denied by one statement can be permitted by a subsequent statement.
A packet that does not match the conditions of any ACL statements will be forwarded by default.
Each statement is checked only until a match is detected or until the end of the ACL statement list.
Each packet is compared to the conditions of every statement in the ACL before a forwarding decision is made.
7.
Choose the command that will correctly configure a standard ACL.
Router# access-list 10 permit any
Router# access-list 101 permit any
Router(config)# access-list 10 permit any
Router(config)# access-list 101 permit any
Router(config)# access-list 10 permit any any
8.
Choose the commands that will correctly configure a standard ACL. (Choose two.)
Router(config)# access-list 97 permit host 192.5.5.1
Router(config)# access-list 32 permit 210.93.105.3 0.0.0.0
Router(config)# access-list 148 permit 201.100.11.2 0.0.0.0
Router(config)# access-list 107 permit host 192.5.5.1 213.45.27.0 0.0.0.255 eq 23
Router(config)# access-list 10 permit tcp 192.5.5.1 0.0.0.255 201.100.11.0 0.0.0.255 eq 80
9.


Select the commands that will apply the ACL in the diagram to filter traffic going to the 192.168.2.0 network.
Router1# configure terminal
Router1(config)# access-list 10 in E0
Router1(config)# interface ethernet 0
Router1(config-if)# access-list 10 in
Router2(config)# interface s1
Router2(config-if)# ip access-group 10 out
Router2(config)# interface ethernet 0
Router2(config-if)# ip access-group 10 out
Router1(config)# interface ethernet 0
Router1(config-if)# ip access-group 10 out
Router2# configure terminal
Router2(config)# access-group 10 out
10.
Which of the following parameters can ACLs use to filter traffic? (Choose three.)
packet size
protocol suite
source address
destination address
source router interface
destination router interface
11.
Which of the following matches an ACL identification number with the correct protocol?(Choose three.)
0 - standard IP
99 - standard IP
100 - extended IP
210 - extended IP
678 - extended IPX
888 - standard IPX
12.
Select the correct statements about extended ACLs. (Choose two)
Extended ACLs use a number range from 1-99.
Extended ACLs end with an implicit permit statement.
Extended ACLs evaluate the source and destination addresses.
Port numbers can be used to add greater definition to an ACL.
Multiple ACLs can be placed on the same interface as long as they are in the same direction.
13.
Which of the following are reasons to use ACLs? (Choose three.)
to provide a basic level of security for network access
to speed up network performance by filtering priority packets
to preserve bandwidth by providing a mechanism for traffic flow control
to decide which packets are forwarded or blocked at the router console port
to screen certain hosts to either allow or deny access to part of a network
to allow all packets passing through the router access to all parts of the network
14.
A router that has two Ethernet interfaces and one serial interface is configured to route both IP and IPX. What is the maximum number of IP ACLs that can be configured to filter packets on this router?
1
2
3
6
12
15.
The router IOS tests each condition statement in an ACL in sequence. Once a match is made, which of the following occurs? (Choose two.)
The entire ACL must be deleted and recreated.
The accept or reject action is performed.
The packet is forwarded to the next hop.
The remaining ACL statements are not checked.
The router goes through the list again to verify that a match has been made.
16.


Refer to the exhibit. The network administrator has connectivity to the routers and networks in the diagram. An ACL has been created to allow the network administrator FTP access to the webserver. This ACL must also deny FTP access to the server from the rest of the hosts on the LAN. Which interface in the exhibit is the recommended location to apply the ACL?
FastEthernet 0/0 on the Carlisle router
Serial 0/0 on the Carlisle router
Serial 0/1 on the Mt. Holly router
FastEthernet 0/0 on the Mt. Holly router
17.


Assuming the ACL in the graphic is correctly applied to an interface, what effect will the ACL have on network traffic?
All traffic to network 172.16.0.0 will be denied.
All TCP traffic will be permitted to and from network 172.16.0.0.
All telnet traffic from the 172.16.0.0 network to any destination will be denied.
All port 23 traffic to the 172.16.0.0 network will be denied.
All traffic from the 172.16.0.0 network will be denied to any other network.
18.


Assuming the ACL in the graphic is correctly applied to an interface, what effect will this ACL have on network traffic?
Host 192.168.15.4 will be denied ftp access to any destination, but will be permitted all other access.
All ftp traffic to host 192.168.15.4 will be denied.
All traffic from that interface will be denied.
No traffic will be denied because a "permit" statement does not exist in this ACL.
19.
Which statements are true regarding the significance of the access control list wildcard mask 0.0.0.7? (Choose two.)
The first 29 bits of a given IP address will be ignored.
The last 3 bits of a given IP address will be ignored.
The first 32 bits of a given IP address will be checked.
The first 29 bits of a given IP address will be checked.
The last 3 bits of a given IP address will be checked.

 

> Trả lời nhanh
Bình luận của bạn sẽ được đăng sau khi chủ blog kiểm duyệt và chấp nhận
Nhập vào tên của bạn:
Nhập mã số xác nhận (bắt buộc):
» Hiển thị cửa sổ mặt cười       » Download bộ gõ tiếng Việt Unikey
 Bạn có muốn chuyển các ký hiệu như :) :( :D ...thành mặt cười trong bài viết này?
 Bạn có muốn chèn thêm chữ ký vào bài viết này ?
 

Trả lời ở chế độ đầy đủ

« Các bài cũ hơn · lehuy0305's Blog · Các bài mới hơn »
 
Lượt xem thứ:





Mạng xã hội của người Việt Nam.
VnVista I-Shine © 2005 - 2025 VnVista.com